ANION DI Resin Color Changing Bulk Media

Standard Features :

• This is single bed ANION color changing resin. ANION resins are negatively charged and remove POSITIVELY charged ions such as chloride, bicarbonate, carbonate, sulfate, nitrate, phosphate, silicate. Color changing resin changes color from blue to amber as resin is used up (exhausted).
• We also offer bulk cation and bulk mixed bed resins. One 5 pound bag is enough for 4 refills of our 10" refillable cartridge.
• Resintech ANION resin is a self indicating color changing resin. Our Anion resin is ResinTech SBG1P-OH-ID is a dyed type 1 gel strong base anion resin in hydroxide form. The ID grade means it has been dyed with a permanent blue dye that changes from deep blue to amber as the resin exhausts. ResinTech SBG1P-OH-ID is intended for cartridge use in mixed beds and other applications where a visual indication of resin exhaustion is desired.
• Don't want to refill this yourself? We professionally pack standard 10" refillable ANION cartridges and 20" refillable ANION cartridges the day you order aswell!

Many manufacturing processes require high purity water for washing, rinsing and test purposes. Not all processes requiring demineralized water need the ultimate quality; however, they may require multi-megohm resistivity water. Anion SBG1P-OH-ID is designed to provide demineralized water with a resistivity in excess of 18.3 megohm. It is specially intended for use in cartridge applications with clear (see-through) housings. In typical operation there is a safety line at the exit end of the cartridge, and when the color change reaches that level, the cartridge is considered exhausted and exchanged for a fresh cartridge.

The actual quality that is obtained depends on the manner in which the cartridge is configured. A constant supply of high purity water can be obtained by using two or three cartridges in series, and allowing the first cartridge to completely change color.

During this operation the second or third cartridge insures that the water leaving the system is of the highest purity. New cartridges are placed into the polishing position and the remaining cartridge is put into the roughing position. This insures complete utilization of all the exchange capacity, which lowers operating costs while increasing average quality. This product is recommended to always be followed by a mixed bed di resin stage as this cartridge will not make zero tds water in it of itself as anion resin by design specifically only removes positively charged ions. 

Our DI resin holding capacity is rated for 6,800 ppm tds per 10" cartridge, with a minimum of 3,000 ppm holding capacity across almost all water profile types.

ANION resins are NEGATIVELY charged and like a magnet they remove positively charged ions present in the water (some positively charged ions removed by ANION resin are : chloride, bicarbonate, carbonate, sulfate, nitrate, phosphate, silicate). IF you are trying to remove something specific from your water, look no further. We recommend adding this NEGATIVELY charged ANION resin cartridge to remove your specific POSITIVELY charged dissolved solids.

PLEASE NOTE! If you decide to use this single bed ANION resin cartridge, we always recommend adding MIXED bed DI resin cartridge after this ANION resin cartridge as you will still have negatively charged dissolved solids in your water. We offer a easy add a stage option if your system is not equipped with 2 di resin stages. [ click here to see our add a stage with anion resin option ]. Additionally, we offer a triple DI resin setup with 1 x cation stage, 1 x anion stage and 1 mixed bed stage. [ click here to see our triple DI resin add on kit ]. Want to save BIG? Buy ANION resin media in bulk and refill yourself! [ click here! ]