Watts Pressure Regulator

WATTS PRESSURE REGULATOR

Series P60 Miniature Plastic Water Pressure Regulators are used in general purpose and OEM applications to regulate pressure in systems that require a constant downstream and accurate flow performance.

It consists of a thermoplastic body construction with 1/4 in. NPT female connections in a straight through or 90°inlet to outlet design, all external components of NSF approved thermoplastics, all internal rubber components (disc, diaphragm, and seals) of FDA grade elastomers, all internal metal components of 300 Series stainless steel, and a bottom clean-out plug for service. Series P60 is compact and lightweight with a high flow capacity. 1/4" sharkbite quick connects on both end makes this a easy connection. It is also suitable for deionized water applications. Maximum Working Pressure: 300psi (20.7 bar).

Pressure is set at 50 PSI from the factory, but you can adjust the PSI by turning the knob on top of the regulator. Turn counter-clockwise to lower the pressure, turn clockwise to raise the pressure as needed.

Comes with 1/4" quick connect fittings. 

Dimensions and Weight

Height: 2.875"

Width: 1.56"

Weight: 4 oz